DigiBox QSD - SDI Quad Split
Features
- Quad screen / single channel display
- Analogue and SDI outputs
- Channel identification
- On-air identification via GPI control
- On-air identification via GPI control
- Simple control of display selection
- IUniversal mains powered standalone unit
The Digibox QSD offers a low-cost, compact solution to monitoring multiple serial digital video signals. The unit accepts four independent serial digital video signals and combines them into a quad display, thus reducing the number of monitors required from four to one. Each input can also be viewed in full screen mode.
The Digibox QSD accepts both synchronous and asynchronous inputs with Outputs synchronized to either a genlock input or SDI input 1, depending on the preference of the user.
The unit provides both serial digital video outputs and analogue component outputs.
To aid channel identification, simple channel idents are provided, which can be enabled/disabled by the user. There is also an on-air indicator which is controlled via GPI (quad display only).
The unit is housed in a robust steel case, and may be rackmounted using the optional RK4 adapter. Up to four units, including others in the Digibox SDI range such as the V2D analogue to SDI convertor, can be combined into this 1U tray.
Specifications |
Signal Inputs: |
Input signals: |
270 Mb/s serial digital video to SMPTE RP259M |
Cable equalisation: |
Up to 130m of Belden 8281 coaxial cable or similar |
Input connectors: |
BNC socket |
|
SDI Outputs: |
Number of outputs: |
2 |
Output: |
270 Mb/s serial digital video to SMPTE RP259M |
Impedance: |
75ohm |
Output level: |
800mV p-p +/-20mV across 75ohm termination |
|
Analogue Video Outputs (each channel of RGB or YPbPr): |
Resolution: |
10-bit |
Amplitude: |
700mV ± 1% |
Noise |
>75dB |
|
Indicators: |
LED 1: |
Power |
LED 2: |
Status |
|
Controls: |
DIP Switches: |
SDI input 1 / Genlock synchronization
Idents on / Idents off
Local control / GPI control |
Rotary controls: |
Position 0 – quad display mode
Position 1 – SDI input 1 full screen
Position 2 – SDI input 2 full screen
Position 3 – SDI input 3 full screen
Position 4 – SDI input 4 full screen
All other positions – N/A |
|
Installation data: |
Package: |
Standard housing, with ten 75ohm BNC signal connectors and one 9-way D-type socket for GPI control
184 x 103 x 42.4mm
(Up to four units can be 1U rackmounted using the optional RK4 adapter) |
Weight: |
950g |
Mains supply: |
90 – 250Vac |
Consumption: |
< 15VA |
|